The four-axis CNC machining center solves the problem of complex, precise, small batch, and multi-variety parts processing (Emerson). It is a flexible, efficient (referring to high-efficiency) automatic machine tool. , Represents the development direction of modern machine tool control (control) technology, is a typical mechatronics product (Product). Compared with ordinary machine tools, the four-axis CNC machining center has higher machining accuracy (precision), and has a very stable (explanation: stable and stable; no change) machining quality. Therefore, the requirements for the quality of operation and control personnel are relatively high, especially in the aspect of shock absorption devices, the following methods of use should be paid attention to:
1. After the machine tool is level, tighten the screw level to fix the horizontal state.
2. Put the required shim under the foot hole of the machine tool, insert the screw rod, clamp the foot with a nut, and place the nut in contact with the machine tool. Shenzhen CNC machining CNC machining refers to processing with CNC machining tools. CNC index-controlled machine tools are programmed and controlled by CNC machining languages, usually G codes. The CNC machining G code language tells the Cartesian position coordinates of the machining tool of the CNC machine tool, and controls the feed speed and spindle speed of the tool, as well as the tool changer, coolant and other functions.
3. Because of the creep phenomenon of rubber, when the horn is used for the first time, adjust the machine level again two weeks later. CNC computer gong processing is an automated machine tool equipped with a program control system. The control system can logically process the program with the control code or other symbolic instructions, and decode it, so that the machine tool can move and process the parts. It is also called CNC or numerically controlled machine tool. Shenzhen CNC machining is actually a numerical control milling machine. In Guangzhou, Jiangsu, Zhejiang and Shanghai, it is called a "CNC machining center", which is an automated machine tool equipped with a program control system. , (Numerical Control Machine Tool) is the abbreviation of Computer numerical control (Computer numerical control), which is an automatic machine tool controlled by a program. The control system can logically process a program with control codes or other symbolic instructions, and decode it by a computer, so that the machine tool can operate and process parts. The rough material is processed into semi-finished finished parts by cutting tools.
4. Adjust the level of the machine tool. The nut rotates counterclockwise and the machine tool rises. The correct use of the damping device of a four-axis CNC machining center is very important. Therefore, it is necessary to firmly grasp (be familiar with and can use) the above four methods of use.
The water from an electric kettle is more poisonous than plastic? This is cleaner than mineral water