Home  >  News  >  Industry News

Precautions after CNC machine tool processing

Time:2021-06-23 Views:247


CNC machining is a machining method that uses digital information to control the displacement of parts and tools in a CNC machine tool. It is an effective way to solve the problem of variable parts, small batches, complex shapes, high precision, and high-efficiency automatic processing.

Matters needing attention after processing:

1. Clean the chip and wipe the machine tool. Keep the machine and the environment clean. Pay attention to check or replace the oil wiper on the worn machine tool rail.

2. Check the status of lubricating oil and coolant, add or replace in time, turn off the power supply on the machine operation panel and the main power supply in turn.

3. CNC machine tools should follow the principle of zeroing first (except for special requirements), manual, fixed-point, and automatic. The operation of the machine tool should follow the principle of low speed, medium speed and high speed. Low-speed and medium-speed operation time is not less than 2-3 minutes. After confirming that there is no abnormal situation, the construction can be started.

4. It is strictly forbidden to knock, correct and correct the workpiece between the chuck and the top. Before proceeding to the next step, it must be confirmed that the workpiece and the tool can be clamped. When changing tools, workpieces, adjusting workpieces or leaving the machine tool during work, the operator must stop.


Previous Back to list Next

Related News

Related Products

Don't be a stranger , Talk to us about your thoughts