CNC lathes are high-tech products that comprehensively use advanced technologies such as computer technology, automatic control technology, automatic detection technology, and precision machinery design and manufacturing. It is a typical mechatronics product with high technical content and high degree of automation. Compared with non-CNC lathes, CNC lathes not only have the characteristics of high machining accuracy, high production efficiency, and stable product quality automation, but also can complete the processing of complex curved parts that are difficult or impossible to machine on ordinary machine tools. Therefore, the position of CNC lathes in the machinery manufacturing industry is becoming more and more important.
The machine has good rigidity: the cross-sectional area of the inclined bed CNC lathe is larger than that of the flat bed of the same specification, that is, it has strong bending and torsion resistance. The cutting tool of the inclined bed CNC lathe is cut from the top of the workpiece, and the cutting force is basically the same as the gravity direction of the workpiece. The spindle runs relatively stable, and it is not easy to cause cutting vibration. However, the cutting force of the flatbed CNC lathe forms a 90° angle with the gravity of the workpiece, which is likely to cause vibration.
Only by insisting on the daily maintenance of CNC lathes can we prolong the service life of parts, prolong the wear cycle of mechanical parts, prevent accidents, and strive for long-term stable operation of CNC lathes. Only in this way can we give full play to the advantages of CNC lathes and achieve the advantages of CNC lathes. The technical performance guarantees the normal operation of the CNC lathe. Therefore, it is very important for both the operators of CNC lathes and the maintenance personnel of CNC lathes. We must attach great importance to the maintenance of CNC lathes.
We should strive to create a good working environment for CNC lathes: because there are many electronic components on CNC lathes, they are afraid of direct sunlight, humidity, dust, vibration, etc., which will corrode or damage the electronic components, or cause short circuits between components, resulting in The machine is not working properly with tools.
It is suggested that customized manufacturers of CNC lathes should increase the utilization rate of CNC lathes as much as possible. For newly purchased CNC lathes, they should be put into use as soon as possible. The failure rate of CNC lathes is relatively large in the initial period of use. The user should make full use of the CNC lathe during the warranty period to expose its weak links as soon as possible and resolve it within the warranty period. If there is a lack of production tasks, it cannot be idle. It should be energized regularly. It should be idling for about 1 hour each time. Use the heat generated during the operation of the CNC lathe to remove or reduce the humidity in the machine.
High-precision five-axis CNC machine tool processing, without which many high-precision equipment ca