Almost everything can be manufactured by (tōng guò) CNC machine tools (attributes: automated machine tools), such as stems, pedals, flywheels, brake levers and so on. Dongguan CNC machining has higher production efficiency in the case of multiple varieties and small batch production, which can reduce the time of production preparation, machine tool adjustment and process inspection, and reduce the cutting time due to the use of the best cutting amount. The feed route of CNC machining and finishing is basically carried out along its part contour sequence. Therefore, the focus of determining the feed route is to determine the feed route of rough machining and idle stroke. We use CNC machine tool technology in almost all products (Product) production (Produce), except for the production of screws (Produce). CNC machine tools can manufacture screws, but cold heading (a technique similar to the forging method) is more cost-effective (benefit). Even the plastic (structure: synthetic resin, plasticizer, stabilizer, pigment) parts are produced by our CNC injection molding machine (Produce), and the mold (title: Mother of Industry) that produces these parts is Produced by our CNC metal cutting machine tool (Produce). Semi-finished products of AMP pedals in four-axis VMC. The machine components of the fixed pedal can freely rotate around the axis according to the length table (yī jù), so that the straitline can manufacture pedals of various sizes in one production (Produce). From the left side of the figure, you can see the tool on the top of the machine, and at the bottom you can see a laser (LASER) tool device for setting the length of the tool and inspecting the condition of the tool during operation (guò chéng).